Tripp Lite SmartPro 1200XLHG - UPS - AC 120 V - 750 Watt - 1000 VA - 4 output connector(s)
Tripp Lite SmartPro 1200XLHG - UPS - AC 120 V - 750 Watt - 1000 VA - 4 output connector(s) Description
Tripp Lite's SMART 1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. UL 60601-1 listed as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes equal to 100 microamps. Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible). Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9) that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
Device Type: UPS - external
Battery Enclosure Type: Internal
Width: 7.5 in
Depth: 8.7 in
Height: 12.5 in
Weight: 46.1 lbs
Enclosure Color: Beige
Power Device
UPS Technology: Line interactive
Input Voltage: AC 120 V
Input Voltage Range: AC 75 - 147 V
Frequency Required: 60 Hz
Input Connector(s): 1 x power NEMA L5-15
Output Voltage: AC 120 V ( 60 Hz )
Power Output Connectors Details: 4 x power NEMA 5-15
Power Capacity: 750 Watt / 1000 VA
Output Waveform: Sinewave
Surge Suppression: Standard
Compliant Standards: UL, cUL, UL 1778
Battery
Run Time (Up To): 16 min at full load
Recharge Time: 4 hour(s)
Expansion / Connectivity
Interfaces: 1 x USB - 4 pin USB Type A ? 1 x management - RS-232 - 9 pin D-Sub (DB-9)
Miscellaneous
Cables Included: 1 x USB cable - external ? 1 x serial cable - external ? Power cable - 6 ft
Compliant Standards: FCC Class A certified, UL
Software / System Requirements
Software Included: Drivers & Utilities
Manufacturer Warranty
Service & Support: 2 years warranty
Service & Support Details: Limited warranty - parts and labor - 2 years
Environmental Parameters
Min Operating Temperature: 32 ?F
Max Operating Temperature: 104 ?F
Min Storage Temperature: 5 ?F
Max Storage Temperature: 122 ?F
Humidity Range Operating: 0 - 95%
Specifications
GeneralPower Device
Battery
Expansion / Connectivity
Miscellaneous
Software / System Requirements
Manufacturer Warranty
Environmental Parameters

No comments:
Post a Comment